Home / Guides / Sleep / Build a Better Sleep Environment

Sleep

Build a Better Sleep Environment

Practical ways to set up your bedroom for sleep: temperature, light, noise, sheets, pillows, and a steady routine.

By the Brand Review Network editorial teamUpdated October 29, 20265 min read6 sources

Set the temperature

Temperature is one of the easiest bedroom settings to change, and one of the most noticeable. Your body cools slightly as you fall asleep, and a room that is too warm works against that.

Cleveland Clinic says a bedroom temperature of about 60 to 67°F (15 to 19°C) is often recommended for sleep. The Sleep Foundation puts the best temperature for most adults around 65°F (18.3°C). Treat those numbers as a starting point and adjust a degree or two at a time until you find what works for you.

  • Set the thermostat to drop before bedtime, or program it to.
  • Use a fan for air movement if you cannot cool the room.
  • Layer bedding so you can add or remove warmth during the night.
  • Choose breathable sheets and sleepwear if you tend to wake up warm.

If you share a bed and run at different temperatures, use separate blankets or duvets. That way each person controls their own layer.

Control light

Light is a strong signal to your brain that it is time to be awake. The National Heart, Lung, and Blood Institute (NHLBI) recommends keeping your bedroom quiet, cool, and dark, and says a dim night light is fine if you need one.

Block outside light

  • Blackout curtains or shades block streetlights and early sunrise. Look for a snug fit at the edges, where light leaks in.
  • A sleep mask is a low-cost option when you cannot change the windows, such as when traveling.
  • Cover small lights from chargers, power strips, and electronics with tape or move them out of view.

Manage screens

The NHLBI suggests using the hour before bed for quiet time and avoiding bright light from TV, computer, and phone screens. It also suggests charging devices as far from the bed as possible so they do not pull you back in. If you read before bed, use a dim lamp or a paper book.

Try this: Set a nightly alarm about an hour before bedtime. When it goes off, dim the lights, plug your phone in across the room, and switch to something quiet.

Reduce noise

Sudden sounds, like a car door, a barking dog, or a partner's snoring, are often more disruptive than steady background sound. You have two main tools: block noise or mask it.

Mask it

A white noise machine, a fan, or a sound app plays a steady sound that makes sudden noises stand out less. Keep the volume at a comfortable, moderate level, and place the source a few feet from your head instead of right beside it.

Block it

Foam or silicone earplugs reduce how much sound reaches your ears. Try a few shapes and sizes to find a comfortable fit. Make sure you can still hear smoke and carbon monoxide alarms. If you are not sure, test them with earplugs in, or ask your household to check.

Soften the room

Rugs, upholstered furniture, heavy curtains, and a filled bookshelf absorb some sound inside the room. Weatherstripping around doors and windows can cut down on drafts and some outside noise.

Choose bedding by how it feels

Sheets come down to two things: the fiber and the weave. Both change how the fabric feels and how warm it sleeps. The comparisons below describe material properties. Personal preference matters more than any label.

Cotton: percale vs. sateen

Percale and sateen can both be made from cotton. The difference is the weave. Percale uses a one-over, one-under weave. Sateen uses a pattern with more threads over than under, often four over and one under.

MaterialHow it feelsWarmthCare notes
Cotton percaleCrisp, matte, lightCooler, breathableWrinkles easily; less prone to pilling than sateen
Cotton sateenSmooth, slight sheen, drapes closelyA little warmerWrinkles less; can pill or snag more
LinenTextured, softens with washingOften breathableWrinkles readily
SilkVery smoothVariesDelicate; follow label care closely
Rayon or viscose from bambooSoft, smooth, drapeyVaries by weaveFollow label care

Linen

Linen is woven from flax fibers. It has a looser, textured hand and tends to get softer with repeated washing. It wrinkles easily, which some people like as a relaxed look.

Silk

Silk is a natural protein fiber with a smooth surface. Silk sheets and pillowcases are delicate and usually need gentle washing or specific care, so read the label before you buy.

Bamboo sheets

Most sheets sold as "bamboo" are rayon or viscose. Bamboo pulp is chemically processed into a regenerated fiber. The Federal Trade Commission says products made this way should be labeled with the proper fiber name, such as rayon. Read the fiber content on the label to know what you are buying.

Thread count is one factor, but a very high number does not guarantee a better sheet. Fiber quality and weave usually matter more.

Match your pillow to your sleep position

A pillow's job is to keep your head and neck in line with your spine. The right height, called loft, depends mostly on how you sleep. The Sleep Foundation describes low loft as under 3 inches, medium loft as 3 to 5 inches, and high loft as over 5 inches.

  • Side sleepers usually need a higher, firmer pillow to fill the space between the ear and the shoulder.
  • Back sleepers usually do well with a medium loft that supports the neck without pushing the head forward.
  • Stomach sleepers usually need a low, soft pillow, or none, to avoid turning the neck up and back.
  • Combination sleepers may like a pillow with adjustable fill so they can fine-tune the height.

Your mattress matters here too. On a soft mattress your shoulder sinks further, so you may need less loft than on a firm one.

Keep it consistent

The best room setup works better with a steady routine. The NHLBI recommends going to bed and waking up at the same time every day, and keeping the difference between weeknights and weekends to no more than about an hour.

  • Pick a wake-up time you can keep seven days a week.
  • Keep the bedroom for sleep, and move work and long screen sessions elsewhere.
  • Build a short wind-down: dim lights, a warm shower, reading, or stretching.
  • Make the room ready before bed, so you are not adjusting the thermostat or curtains at midnight.

A quick bedroom checklist

Use this table to review your room one item at a time. Change one thing, give it a week or two, and notice how you feel before changing the next.

AreaWhat to checkSimple fix
TemperatureDo you wake up hot or cold?Lower the thermostat toward the 60s °F, add a fan, or change bedding layers
LightCan you see streetlights, sunrise, or device lights from bed?Blackout shades, a sleep mask, or tape over small LEDs
ScreensIs your phone within reach of your pillow?Charge it across the room and stop screens about an hour before bed
NoiseDo sudden sounds wake you?A fan, white noise machine, or earplugs
SheetsDo they feel too warm, rough, or slippery?Try a different weave or fiber
PillowIs your neck bent up or down in your usual position?Adjust loft to match how you sleep
ScheduleDo your bed and wake times shift a lot?Keep them within about an hour every day

When to talk to a doctor

Changing your bedroom can make sleep more comfortable. It cannot treat a sleep disorder. If you regularly have trouble falling or staying asleep, feel very sleepy during the day, snore loudly, or someone notices you stop breathing or gasp during sleep, talk to a doctor. Effective treatments exist for conditions like insomnia and sleep apnea, and a clinician can help figure out what is going on.

Common questions

What temperature should my bedroom be for sleep?

Cleveland Clinic says about 60 to 67°F is often recommended, and the Sleep Foundation suggests around 65°F for most adults. Adjust within that range to what feels comfortable.

Is percale or sateen better?

It depends on feel. Percale is crisp and breathable, while sateen is smoother, has a slight sheen, and sleeps a little warmer.

Are bamboo sheets actually made of bamboo?

Most are rayon or viscose made from bamboo pulp. The FTC says such products should be labeled with the proper fiber name, such as rayon.

Do I need to stop using my phone before bed?

The NHLBI suggests avoiding bright screens for about an hour before bed and charging devices away from your bed.

Sources

  1. Cleveland Clinic: What Is the Best Temperature for Sleep?
  2. Sleep Foundation: Best Temperature for Sleep
  3. NHLBI: Healthy Sleep Habits
  4. Sleep Foundation: Sateen vs. Percale Sheets
  5. FTC: How to Avoid Bamboozling Your Customers
  6. Sleep Foundation: Best Pillows

This guide is general information, not professional advice. Every specific claim was checked against the sources above. Spotted an error? Tell us and we'll fix it. Read how we research.

Keep reading

All guides
Sleep · 6 min read

Mattress Buying Guide

How to choose a mattress type, firmness, and feel for your body and sleep position, and what to check in the trial and warranty before you buy.

Shopping Smarts · 6 min read

How to Spot Fake Online Reviews

Fake and filtered reviews can make a weak product look great. Here is how to recognize the warning signs, what federal rules now ban, and how to check a product before you buy.

Home & Safety · 6 min read

Air Purifier Buying Guide

How to read HEPA claims, CADR ratings, and room size labels, plus what to know about noise, filter costs, carbon filters, and ozone.