Home / Guides / Health & Wellness / How to Read a Supplement Label

Health & Wellness

How to Read a Supplement Label

A plain-language guide to the Supplement Facts panel, proprietary blends, label claims, and quality seals, plus why your doctor or pharmacist should hear about every supplement you take.

By the Brand Review Network editorial teamUpdated October 29, 20266 min read5 sources

How supplements are regulated

Before you read the label, it helps to know who checked it. In most cases, nobody at the government did, at least not before the product hit the shelf.

Dietary supplements in the United States are regulated under a framework set up by the Dietary Supplement Health and Education Act of 1994, known as DSHEA. Under that law, the Food and Drug Administration (FDA) does not approve dietary supplements or their labeling before they are marketed. FDA also does not review supplements for effectiveness before sale, as it does for prescription and over-the-counter drugs.

Manufacturers and distributors are responsible for making sure their products are safe and their labels are truthful. FDA mainly acts after a product is on the market, for example by taking action against unsafe products or illegal claims.

That means the label is written by the company selling the product. Reading it carefully is one of the few checks you have.

Important: This guide explains how to read a label. It is not medical advice. Talk with your doctor, pharmacist, or another qualified health professional before you start, stop, or change any supplement.

The Supplement Facts panel

Most supplements carry a box labeled "Supplement Facts." It looks a lot like the Nutrition Facts label on food, with a few differences. Here is what you will find, from top to bottom.

Serving size and servings per container

Everything else on the panel is based on one serving. Check the serving size first. If a serving is two capsules and you take one, you are getting half of each listed amount. If a serving is three gummies, a bottle may run out faster than you expect.

Dietary ingredients and amounts

Each dietary ingredient is listed with its amount per serving, usually by weight. Units vary, so read them carefully:

  • mg means milligrams.
  • mcg means micrograms, which are one-thousandth of a milligram.
  • Some vitamins may also be listed in other units, so compare like with like.

Percent Daily Value

The % Daily Value (%DV) column shows how much of a reference amount one serving provides. Daily Values are reference numbers FDA uses for labeling. They help you compare products and see how one serving fits into a day.

A few things to know:

  • A %DV above 100 is common on supplements. It means one serving provides more than the reference amount. It does not mean more is better for you.
  • Many ingredients, such as herbs and specialty compounds, have no Daily Value. In that case the panel shows a symbol in the %DV column that points to a footnote saying "Daily Value not established."
  • Your own needs may differ from the reference amount. A health professional can help you understand what fits you.

Other ingredients

Below the panel, an "Other Ingredients" list names things like fillers, binders, coatings, colors, and flavors. Check it if you have allergies or avoid certain ingredients, such as gelatin.

Other required label information

FDA lists several other items that should appear on a supplement label, including:

  • A statement that the product is a "dietary supplement" or a similar term.
  • The net quantity of contents.
  • The name and place of business of the manufacturer, packer, or distributor.
  • A domestic address or phone number for reporting serious adverse events.

Proprietary blends

Some labels group several ingredients under a name such as "Proprietary Blend," "Energy Complex," or another descriptive or invented title. FDA rules allow this, with limits.

For a proprietary blend, the label must show:

  • The name of the blend.
  • The total weight of the blend.
  • The ingredients in the blend, listed in descending order of predominance by weight.

What the label does not have to show is the amount of each individual ingredient inside the blend. Dietary ingredients that have a Daily Value must still be listed separately with their own amounts.

So if a blend weighs 500 mg and lists five ingredients, you know the first ingredient makes up the largest share. You do not know whether the last ingredient is 100 mg or a tiny trace. If you want to know exactly how much of a specific ingredient you are taking, a product that lists every amount gives you more information.

Claims and the FDA disclaimer

Supplement labels can make certain kinds of claims. Knowing which kind you are reading helps you judge it.

Claim typeWhat it doesFDA review before use?
Structure/function claimDescribes how a nutrient or ingredient affects normal body structure or function, such as "calcium builds strong bones"No. The company must notify FDA no later than 30 days after marketing and must have evidence the claim is truthful.
Health claimDescribes a link between a substance and a lower risk of a disease or health conditionYes. Health claims require FDA authorization.
Disease claimSays a product diagnoses, treats, cures, mitigates, or prevents a diseaseNot allowed for supplements. Only drugs can legally make these claims.

The required disclaimer

When a supplement makes a structure/function claim, the label must include a disclaimer. It says that the statement has not been evaluated by the FDA and that the product is not intended to diagnose, treat, cure, or prevent any disease.

When you see that disclaimer, read it as a reminder. The claim next to it came from the company, and FDA did not review the evidence behind it before the product went on sale.

Words to read with care

  • "Natural." FDA advises that you should not assume a product described as natural is safe.
  • Disease language. If a supplement claims to cure or treat a disease, that is a red flag, because supplements cannot legally make those claims.
  • Big promises. Phrases like "miracle," "works for everyone," or "no side effects" deserve skepticism.

Third-party quality seals

Because FDA does not test supplements before sale, some manufacturers pay independent organizations to test their products. Each program has its own standards. Here is a general overview of three well-known ones.

ProgramWhat it generally checksWhat it does not tell you
USP Verified (U.S. Pharmacopeia)That the product contains the listed ingredients in the declared amounts and does not contain harmful levels of specified contaminantsWhether the product works or is right for you
NSF Certified for SportLabel accuracy, unsafe levels of contaminants, and substances banned in sport, plus facility auditsWhether the product works or is right for you
ConsumerLab.comAn independent company that tests products against its own quality criteria and offers a paid certification program to manufacturersWhether the product works or is right for you

A seal is a useful signal about quality and label accuracy. It is not an FDA approval, and it does not mean the supplement is safe for your particular health situation. Programs are voluntary, so a product without a seal has simply not been certified by that program. To confirm a product is currently certified, check the certifier's own website.

Interactions and talking to your doctor

Supplements can have real effects on your body, and some interact with medicines. FDA notes that some supplements can change how a medicine is absorbed, broken down, or removed from the body. Some can also interfere with lab tests or have dangerous effects during surgery.

FDA gives examples such as these:

  • St. John's wort can make several kinds of medicines less effective, including some birth control pills and some drugs for heart disease, depression, and HIV.
  • Warfarin, ginkgo biloba, aspirin, and vitamin E can each thin the blood. Taking them together may increase the risk of internal bleeding or stroke.

These are only examples. They are not a complete list, and they are not a reason to start or stop anything on your own.

What to do

  • Tell your doctor and pharmacist about every supplement you take, including doses.
  • Bring the bottles or a written list to appointments.
  • Ask before starting a new supplement, especially if you take prescription medicine, are pregnant or breastfeeding, or have surgery coming up.
  • If you have a bad reaction, contact your health care provider first. You or your provider can also report it to FDA through its Safety Reporting Portal at safetyreporting.hhs.gov.

A label-reading checklist

  1. Check the serving size.
  2. Read each ingredient amount and its unit.
  3. Note any %DV well over 100 and ask a professional if that is appropriate for you.
  4. Look for proprietary blends and decide whether you need exact amounts.
  5. Scan the Other Ingredients list for allergens.
  6. Read any claims and find the FDA disclaimer.
  7. Look for a third-party seal and confirm it on the certifier's site.
  8. Talk to your doctor or pharmacist before you start.

Common questions

Does the FDA approve dietary supplements?

No. The FDA does not approve dietary supplements or their labeling before they are sold. Manufacturers are responsible for safety and label accuracy, and FDA mainly acts after products are on the market.

What does a %DV over 100 mean?

It means one serving provides more than the reference Daily Value for that nutrient. That does not mean the higher amount is better for you, so ask a health professional what fits your needs.

Why does a proprietary blend not list each amount?

FDA rules let companies list the total weight of a blend and its ingredients in order by weight without giving each individual amount. That limits how much you can learn about any single ingredient.

Does a quality seal mean a supplement is safe for me?

No. Seals mainly speak to label accuracy and contaminants. Only a health professional who knows your history and medicines can help you decide whether a supplement is appropriate.

Sources

  1. FDA — Questions and Answers on Dietary Supplements
  2. FDA — Dietary Supplement Labeling Guide: Chapter IV. Nutrition Labeling
  3. FDA — Structure/Function Claims
  4. FDA — FDA 101: Dietary Supplements
  5. FDA — Mixing Medications and Dietary Supplements Can Endanger Your Health

This guide is general information, not professional advice. Every specific claim was checked against the sources above. Spotted an error? Tell us and we'll fix it. Read how we research.

Keep reading

All guides
Shopping Smarts · 6 min read

How to Spot Fake Online Reviews

Fake and filtered reviews can make a weak product look great. Here is how to recognize the warning signs, what federal rules now ban, and how to check a product before you buy.

Home & Safety · 6 min read

Air Purifier Buying Guide

How to read HEPA claims, CADR ratings, and room size labels, plus what to know about noise, filter costs, carbon filters, and ozone.

Sleep · 5 min read

Build a Better Sleep Environment

Practical ways to set up your bedroom for sleep: temperature, light, noise, sheets, pillows, and a steady routine.